“It’s super easy but requires attention and patience,” she adds. The key is to converting a closet to an office build the frame and mount the drawer slides before you build the drawers.
- After selecting your small workroom area, it is time to shift your thoughts toward your design.
- Then, installed the little mount brackets using the included screws.
- Depending on the kind of cloffice you opt for, it can also become a part of your room’s decor.
- I finished the surfaces with sealer & tung oil because I like the look of stained wood better than painted surface.
- He explains that this can show flexibility in a space.
Cloffice inspiration from David Land and Kritsada PanichgulAt the end of a workday, the closet door can be shut to separate the office from the living space. Depending on the kind of cloffice you opt for, it can also become a part of your room’s decor. If you plan on having a lot of cords, I would advise using a hole saw drill bit to cut a small, circular hole in one of the top corners. This will allow https://remotemode.net/ you to neatly run your cords all to one place, since you won’t be able to run anything behind the desk. One more thing you should consider when picking out your lattice moulding is thickness. Our baseboards are .25″ thick, so we wanted to be consistent by choosing moulding with the same depth. The main thing you want to avoid is choosing a moulding that is noticeably thicker than your baseboards.
Share this story
Her space now boasts storage galore and features a sizable workstation, fashion forward accessories, and plenty of other glam touches. Any clothing fanatic is bound to fall head over heels for this setup. “Most reach-in closets are about 2 feet deep, so a shallow desk can slide right in,” says professional organizer Kay Patterson. “Some fun wallpaper or cute desk decor will make the space more inviting.” Just attach the trim using finishing nails from the front. It’s a little more tricky to do if you are using a hammer and nails, but still works just fine. Of course, you’ll have to fill those nails holes, so it’s a bit more work all around.
Would a closet be load bearing?
Closet walls can be both load-bearing or non-bearing. To determine if a closet wall is a load-bearing one or not, study its building plan, as it usually provides such information. Other methods include checking for perpendicular floor joists and consulting with experts.
If you’re painting with a completely different wall color, you will want to measure off and just paint the top portion of your closet with the new lighter color. Lattice Moulding – This will be used to create the board & batten detail. We used four pieces of quarter inch thick 2.25″ x 8′ pine lattice moulding. The amount you need will be dependent on how big your closet is and how close together you want your boards to be. This will be used to remove existing shelving, screw in the supports for the desk, and screw in the floating shelf above the desk. “You can never have too much storage space in your home,” says Kimberly Jay, a broker at Compass.
Incorporate office storage solutions.
You could also try painting the back wall with chalkboard paint. Draw out a calendar or a to-do list, or just let your imagination wander. Just because you’re working out of a closet doesn’t mean that your new office space has to look like, well, a utility closet. So spruce up your space with pretty, sentimental items that are meaningful to you, such as framed photos or a nice vase with fresh Gerbera daisies.